Western Bluebird House Plans

Author Robin 31 Jul 2024

Western Bluebird House Plans - Cut a 1×6 to 13 1/2″ long for the back (c). Wood should be around 5/8 thick for insulation. Use aged red cedar if possible. Nabs 2020 bluebird nestbox saf 1/24/2020.

Pin On Bird Houses

Cut two 1×6's to 4″x10 3/4″ long for the sides (b). Standard board 1 x 10 x 12 long for roof. Nabs fact sheets & plans.

The Entrance Should Be 1 1/2.

Drill 5/8 vent holes 1 down from the top and 2 in from each side. Bluebirds also avoid boxes that reside next to large bodies of water. The western bluebird house plans are simple and easy to build.

The 10 Diy Bluebird House Plans.

The already made bluebird houses are great too. Drill 1/4 holes and cut the corners for drainage. Learn about the nesting habitat, period, and tips for this bird.

Drill A 1/8 Hole, In Each Side Panel, 9 1/2 From The Bottom And 3/8 From The Front.

The materials required for this project include a piece of plywood, a drill, some screws, wire mesh, and a saw. Attach the house with a screw to a smooth steel post or a wooden post. The instructions are as follows:

These Are Clear And Easy To Understand Plans For Building A Bluebird House.

Box height varies depending on drop selected (entry to floor distance). Sand all edges prior to assembly. Two 12 boards can be combined with titebond iii for roof.

This House Can Be Made For Three Species Of Bluebirds, Eastern, Western And Mountain, Although The Dimensions We Give Are For The Eastern And Western Species.

A cooler bluebird house design. The western bluebird birdhouse (same as for the mountain bluebird), has a 5″ by 5″ floor, 12″ inside floor to ceiling and a 1 9/16″ diameter entrance hole located 10″ above the floor and ventilation openings. These educational fact sheets and plans for construction of bluebird nest boxes/accessories are free to download and print (as indicated by (pdf) after each title) for your own use, or to use as handouts at bluebird programs, or for anyone interested in bluebirds.

Find Out Where To Place The Nest Box, What Materials To Use, And How To Attract And Protect These Colorful Birds.

Variable from 5 to 8 1/2. These will be used for the 1 1/2 galvanized screws that will function as hinges for the front door. You can use a variety of woods and plywood to build this birdhouse, as long as they.

Use Wood Stock Rough Cut On Both Sides.

Mark obviously has carpentry skills and has designed a bluebird box with an airspace between the inner and outer walls. The depth should be 8. Build the western and mountain bluebird nest box with red cedar, pine, or almost any soft wood.

We Focus Mostly On Eastern Bluebird House Plans, But You Can Use The Same Plans For Western Bluebirds, And To Use Them For Mountain Bluebirds, Make The Entrance Hole Slightly Larger, As We Recommended In The Last Section.

Bluebirds don't like bodies of water in front of the house. The hole should be placed 2 inches (5.1 cm) from the top of the wood and 2.5 inches (6.4 cm) from both sides. Front opening, top pivot, flat roof.

Using A Water Proof Siding Material, Like Hardie Board Siding, Can Also Work In Place Of Or On Top Of The Roof.

A bird house hung out next to a tree, overlooking an open field. Bluebirds don't like thick vegetation near the house. The entry hole should be 1 9/16″ (optimum size) or 1 1/2″ in diameter.

Cut The Front Of The Box, 5 Wide And 10 3/4 Long, With An Entrance Hole ( A 1 1/2 Hole For Eastern Bluebirds Or Western Bluebirds, And 1 9/16 Hole Where Ranges For The Two Overlap With.

Toward the top of the front edge, and 3/8 in, drill a 1/8 hole for a nail or a screw. Rough wood makes it easier for chicks to enter and exit. Cut one 1×6 to 4″x4″ for the floor (a).

Drill A 1 9/16″ Diameter Entrance Hole Located 10.

Kimgiancaterino on april 14, 2012: Floor, this box is ideal for larger cavity nesters such as western and mountain bluebirds. Materials for a bluebird house.

Use A Spade Bit, Hole Saw, Or Adjustable Size Hole Bit With Your Drill To Create The Hole.

Bluebirds don't mind having their houses put on a tree, as long as the canopy is high or very open. The vent holes on the side panels should be 3/4″ in diameter. Make a 5″ by 5″ floor (inside dimensions) and a 12″ floor to ceiling height (inside front).

In Addition, The Plans Include A Black Vent Pipe That When Heated, Will Draw Air Into The Air Space From Below The Box (See Photo Above).

The pipe detaches from the wooden roof to monitor bluebird nests quickly and easily. Putting your bluebird house together. For further assistance, please use our contact page.

Find Tips On Habitat, Predator Prevention, House Sparrow Deterrence And More.

In areas where mountain bluebirds reside, drill the. Download a pdf plan for a moderate difficulty nest box for western bluebirds, a species in decline in certain regions.