Audubon Bluebird House Plans

Author Robin 12 Jul 2024

Audubon Bluebird House Plans - The main entrance hole (for the adults) is 1 1/2″ and the other three (for the chicks) are each 1″ in. Building nest boxes and nest box kits as a group activity (pdf) (by charles wade) includes plans and complete information. Drill a hole on the hinged side 2 inches up from the bottom and 1/2 inch in from the side. These educational fact sheets and plans for construction of bluebird nest boxes/accessories are free to download and print (as indicated by (pdf) after each title) for your own use, or to use as handouts at bluebird programs, or for anyone interested in bluebirds.

Going To Be Building Several Bluebird Nesting Boxes To Help Keep The Bugs Out Of My Garden

On each side, drill a row of 5⁄8 inch ventilation holes. Follow the instructions and diagrams to create a home for bluebirds in your backyard. Note the predrilled 3/4 hole on the mounting block.

Using A Water Proof Siding Material, Like Hardie Board Siding, Can Also Work In Place Of Or On Top Of The Roof.

For mountain bluebirds), then use a rasp to even out the edges. Sand all edges prior to assembly. Nabs 2020 bluebird nestbox saf 1/24/2020.

The Next Step To Build A Bluebird House Is To Cut Part D From A 1×4 So The End Is 45 Degrees, And Then Reset Your Saw To Cut The Piece To Final Length.

Putting your bluebird house together. This nest box should be at least 10″ long and at least 7″ wide with the backboard at least 6″ high and the front board 8 or 9″ high. The pipe detaches from the wooden roof to monitor bluebird nests quickly and easily.

For Further Assistance, Please Use Our Contact Page.

Use these plans to build your own nest box for songbirds such as chickadees, swallows and bluebirds, plus wood ducks. The 10 diy bluebird house plans. We focus mostly on eastern bluebird house plans, but you can use the same plans for western bluebirds, and to use them for mountain bluebirds, make the entrance hole slightly larger, as we recommended in the last section.

The Rear Edge Should Stand 12 1⁄4 Inches Tall, With The Front Edge At 10 3⁄4 Inches In Height.

Standard board 1 x 10 x 12 long for roof. The mounting block for the gilbertson pole system is installed on the back of the xbox with two exterior deck screws (2). Thank you to ibm for sponsoring the development and production of these kits.

Climate Change Adds To The Pressure On Many Of These Species, Says Audubon's Chief Scientist, Gary Langham.

Screech owl or american kestrel nest box. We have included 3 very good and successful designs below that are all easy to build, except where noted. The vent holes on the side panels should be 3/4″ in diameter.

Wooden Box Instructions (Advanced) Or Carton Box Instructions (Beginner) Interested In Building Or Monitoring Prothonotary Warbler Nests?

Audubon's birds and climate report spells bad news for both the western bluebird —projected to lose the majority of its winter range by 2080—and the mountain bluebird —projected to experience severe loss in its summer range. These all use exclusively right angle. Drill 1/4 holes and cut the corners for drainage.

The Hole Should Be Placed 2 Inches (5.1 Cm) From The Top Of The Wood And 2.5 Inches (6.4 Cm) From Both Sides.

Insert the nail to hold the side door closed. There is also a great deal of satisfaction from seeing a family of young birds fledge from a box you built! For the two side panels, slice wooden boards to 6 1⁄2 inches wide.

Two 12 Boards Can Be Combined With Titebond Iii For Roof.

Alternative bluebird nest box 2. Listed in this fact sheet are three birdhouse designs for bluebirds. Find free plans for building bird houses for various species, including bluebirds, woodpeckers, nuthatches, chickadees, flickers, swallows and wrens.

Measure And Cut Bluebird House Door.

Cut one 1×6 to 4″x4″ for the floor (a). Building nest boxes is a fun, relaxing activity that can also save you money. Audubon coppertop cedar wood bluebird house for a round entrance hole, eastern bluebird boxes should be 1 1/2 inches in diameter and 1 9/16 inches for mountain and western bluebirds.

To Construct The Nest Box Top, Cut A Square Wooden Piece Measuring 11 1⁄4 Inches On All Sides.

Drill at a slight downward angle, going through the front of the house and into the side. The entry hole should be 1 9/16″ (optimum size) or 1 1/2″ in diameter. Learn how to make a bluebird box with wood, nails, and a few other materials.

Use A Spade Bit, Hole Saw, Or Adjustable Size Hole Bit With Your Drill To Create The Hole.

Nabs fact sheets & plans. Cut two 1×6's to 4″x10 3/4″ long for the sides (b). Measure up 11 from the bottom edge, centering the entrance hole across the width.